Level 64
16 Rings · 8 Board
Rotate Rings
Rotate Rings Level 66 walkthrough
The game has different level schedules, so the board for the same level number may differ. Choose the thumbnail that matches your game.
Ring numbers
7 rings, 6 blocking pins, 8 slide bars, 8 clamps, 2 timed bombs
1234567
Default A · Numbers identify the rings on the diagram; they do not specify an operation order.
Choose a matching board
Filters examine every variant; choose a thumbnail to compare a matching board.
Board · A
7 rings, 6 blocking pins, 8 slide bars, 8 clamps, 2 timed bombs
Ring numbers
1234567
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 7 · Blocking pins: 6 · Stop pins: 0 · Slide bars: 8 · Clamps: 8 · Bombs: 2
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. Bombs are shown at their saved positions; their effects and timers are not included in this candidate. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 4 clockwise about 115°. Target opening direction: 150° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 6 rings, 8 bars.
Rotate Ring 1 clockwise about 125°. Target opening direction: 55° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 5 rings, 8 bars.
Move S8 right along its track about 3.00 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S8. Expected remainder: 5 rings, 7 bars.
Move S3 down along its track about 6.86 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 5 rings, 6 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Bomb Ring
- Carries a timed bomb and can clear other rings. Deal with it before the countdown ends.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Lower center | Open |
| 2 | Lower center | Closed |
| 3 | Upper center | Closed |
| 4 | Lower center | Open |
| 5 | Upper center | Closed |
| 6 | Upper center | Closed |
| 7 | Upper center | Closed |
- Ring 7 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
Board · B
8 rings, 9 blocking pins, 7 slide bars, 7 clamps
Ring numbers
12345678
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 8 · Blocking pins: 9 · Stop pins: 2 · Slide bars: 7 · Clamps: 7 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 8 clockwise about 150°. Target opening direction: 210° (right 0°, up 90°). Release and wait. Expected departure: Ring 8. Expected remainder: 7 rings, 7 bars.
Rotate Ring 6 counterclockwise about 5°. Target opening direction: 185° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 7 rings, 7 bars.
Move S1 down along its track about 0.57 ring radii. Release and wait. No departure is expected yet. Expected remainder: 7 rings, 7 bars.
Rotate Ring 3 counterclockwise about 25°. Target opening direction: 205° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 7 rings, 7 bars.
Rotate Ring 3 counterclockwise about 35°. Target opening direction: 240° (right 0°, up 90°). Release and wait. Expected departure: Ring 3. Expected remainder: 6 rings, 7 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Stop pin
- Limits how far a ring can turn, so only part of the ring is reachable.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Lower left | Open |
| 2 | Middle left | Open |
| 3 | Upper left | Open |
| 4 | Lower center | Closed |
| 5 | Center | Open |
| 6 | Center | Open |
| 7 | Upper center | Open |
| 8 | Lower right | Open |
- Ring 7 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
Board · C
16 rings, 16 blocking pins, 4 slide bars, 4 clamps
Ring numbers
12345678910111213141516
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 16 · Blocking pins: 16 · Stop pins: 0 · Slide bars: 4 · Clamps: 4 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 12 clockwise about 157°. Target opening direction: 328° (right 0°, up 90°). Release and wait. Expected departure: Ring 12. Expected remainder: 15 rings, 4 bars.
Rotate Ring 5 clockwise about 179°. Target opening direction: 6° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 14 rings, 4 bars.
Move S3 right along its track about 7.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 14 rings, 3 bars.
Rotate Ring 13 clockwise about 72°. Target opening direction: 301° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 14 rings, 3 bars.
Rotate Ring 13 clockwise about 52°. Target opening direction: 249° (right 0°, up 90°). Release and wait. Expected departure: Ring 13. Expected remainder: 13 rings, 3 bars.
Rotate Ring 14 clockwise about 99°. Target opening direction: 216° (right 0°, up 90°). Release and wait. Expected departure: Ring 9. Expected remainder: 12 rings, 3 bars.
Rotate Ring 14 clockwise about 50°. Target opening direction: 166° (right 0°, up 90°). Release and wait. Expected departure: Ring 11, Ring 14. Expected remainder: 10 rings, 3 bars.
Rotate Ring 8 clockwise about 50°. Target opening direction: 260° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 10 rings, 3 bars.
Rotate Ring 4 clockwise about 180°. Target opening direction: 145° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 10 rings, 3 bars.
Rotate Ring 4 clockwise about 12°. Target opening direction: 133° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 9 rings, 3 bars.
Rotate Ring 8 clockwise about 62°. Target opening direction: 198° (right 0°, up 90°). Release and wait. Expected departure: Ring 8. Expected remainder: 8 rings, 3 bars.
Rotate Ring 10 counterclockwise about 42°. Target opening direction: 102° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 8 rings, 3 bars.
Rotate Ring 6 counterclockwise about 19°. Target opening direction: 89° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 8 rings, 3 bars.
Rotate Ring 6 counterclockwise about 51°. Target opening direction: 140° (right 0°, up 90°). Release and wait. Expected departure: Ring 6. Expected remainder: 7 rings, 3 bars.
Rotate Ring 1 counterclockwise about 96°. Target opening direction: 256° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 6 rings, 3 bars.
Move S2 left along its track about 10.86 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S2. Expected remainder: 6 rings, 2 bars.
Rotate Ring 10 clockwise about 132°. Target opening direction: 330° (right 0°, up 90°). Release and wait. Expected departure: Ring 10. Expected remainder: 5 rings, 2 bars.
Move S1 down along its track about 0.86 ring radii. Release and wait. No departure is expected yet. Expected remainder: 5 rings, 2 bars.
Rotate Ring 2 counterclockwise about 105°. Target opening direction: 320° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 4 rings, 2 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Upper left | Open |
| 2 | Middle left | Open |
| 3 | Center | Closed |
| 4 | Lower center | Open |
| 5 | Lower center | Open |
| 6 | Upper center | Open |
| 7 | Center | Open |
| 8 | Center | Open |
| 9 | Lower center | Open |
| 10 | Upper center | Open |
| 11 | Lower center | Open |
| 12 | Middle right | Open |
| 13 | Middle right | Open |
| 14 | Lower right | Open |
| 15 | Upper right | Open |
| 16 | Middle right | Open |
- Ring 4 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 10. Check this pair on the diagram.
- Ring 16 is connected to a blocking relationship with ring 10. Check this pair on the diagram.
- Ring 15 is connected to a blocking relationship with ring 16. Check this pair on the diagram.
- Ring 13 is connected to a blocking relationship with ring 12. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 14 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
Board · D
14 rings, 18 blocking pins
Ring numbers
1234567891011121314
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 14 · Blocking pins: 18 · Stop pins: 0 · Slide bars: 0 · Clamps: 0 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution.
Rotate Ring 9 counterclockwise about 62°. Target opening direction: 30° (right 0°, up 90°). Release and wait. Expected departure: Ring 9. Expected remainder: 13 rings, 0 bars.
Rotate Ring 10 clockwise about 68°. Target opening direction: 330° (right 0°, up 90°). Release and wait. Expected departure: Ring 10. Expected remainder: 12 rings, 0 bars.
Rotate Ring 4 clockwise about 34°. Target opening direction: 146° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 4 clockwise about 56°. Target opening direction: 90° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 6 clockwise about 54°. Target opening direction: 149° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 6 clockwise about 57°. Target opening direction: 92° (right 0°, up 90°). Release and wait. Expected departure: Ring 6. Expected remainder: 11 rings, 0 bars.
Rotate Ring 5 clockwise about 180°. Target opening direction: 331° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 11 rings, 0 bars.
Rotate Ring 5 clockwise about 59°. Target opening direction: 272° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 10 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Middle left | Open |
| 2 | Lower left | Open |
| 3 | Upper left | Open |
| 4 | Center | Open |
| 5 | Upper center | Open |
| 6 | Lower center | Open |
| 7 | Lower center | Open |
| 8 | Upper center | Open |
| 9 | Lower center | Open |
| 10 | Upper center | Open |
| 11 | Center | Open |
| 12 | Lower right | Open |
| 13 | Upper right | Open |
| 14 | Middle right | Open |
- Ring 8 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
- Ring 13 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 13 is connected to a blocking relationship with ring 10. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 14 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 14 is connected to a blocking relationship with ring 12. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
Board · E
9 rings, 11 blocking pins, 6 slide bars, 4 clamps
Ring numbers
123456789
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 9 · Blocking pins: 11 · Stop pins: 0 · Slide bars: 6 · Clamps: 4 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 6 clockwise about 180°. Target opening direction: 270° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 9 rings, 6 bars.
Rotate Ring 6 clockwise about 60°. Target opening direction: 210° (right 0°, up 90°). Release and wait. Expected departure: Ring 6. Expected remainder: 8 rings, 6 bars.
Move S5 left along its track about 1.43 ring radii. Release and wait. No departure is expected yet. Expected remainder: 8 rings, 6 bars.
Move S5 left along its track about 2.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S5. Expected remainder: 8 rings, 5 bars.
Rotate Ring 4 counterclockwise about 41°. Target opening direction: 131° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 8 rings, 5 bars.
Move S1 left along its track about 6.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S1. Expected remainder: 8 rings, 4 bars.
Rotate Ring 4 counterclockwise about 79°. Target opening direction: 210° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 7 rings, 4 bars.
Rotate Ring 2 counterclockwise about 120°. Target opening direction: 270° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 6 rings, 4 bars.
Move S3 up along its track about 2.29 ring radii. Release and wait. No departure is expected yet. Expected remainder: 6 rings, 4 bars.
Move S3 up along its track about 4.86 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 6 rings, 3 bars.
Rotate Ring 7 clockwise about 60°. Target opening direction: 30° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 6 rings, 3 bars.
Move S2 up along its track about 1.43 ring radii. Release and wait. No departure is expected yet. Expected remainder: 6 rings, 3 bars.
Rotate Ring 8 clockwise about 120°. Target opening direction: 330° (right 0°, up 90°). Release and wait. Expected departure: Ring 8, Ring 9. Expected remainder: 4 rings, 3 bars.
Rotate Ring 7 clockwise about 180°. Target opening direction: 210° (right 0°, up 90°). Release and wait. Expected departure: Ring 7. Expected remainder: 3 rings, 3 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Lower left | Open |
| 2 | Middle left | Open |
| 3 | Center | Closed |
| 4 | Upper center | Open |
| 5 | Lower center | Open |
| 6 | Center | Open |
| 7 | Center | Open |
| 8 | Middle right | Open |
| 9 | Middle right | Open |
- Ring 1 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
Board · F
24 rings, 30 blocking pins, 2 slide bars, 4 clamps
Ring numbers
123456789101112131415161718192021222324
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 24 · Blocking pins: 30 · Stop pins: 0 · Slide bars: 2 · Clamps: 4 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 22 clockwise about 96°. Target opening direction: 309° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 24 rings, 2 bars.
Rotate Ring 3 clockwise about 69°. Target opening direction: 66° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 24 rings, 2 bars.
Rotate Ring 8 clockwise about 42°. Target opening direction: 48° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 24 rings, 2 bars.
Rotate Ring 8 clockwise about 50°. Target opening direction: 358° (right 0°, up 90°). Release and wait. Expected departure: Ring 8. Expected remainder: 23 rings, 2 bars.
Rotate Ring 3 clockwise about 134°. Target opening direction: 292° (right 0°, up 90°). Release and wait. Expected departure: Ring 3. Expected remainder: 22 rings, 2 bars.
Rotate Ring 4 clockwise about 96°. Target opening direction: 129° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 22 rings, 2 bars.
Rotate Ring 1 clockwise about 60°. Target opening direction: 120° (right 0°, up 90°). Release and wait. Expected departure: Ring 2, Ring 1. Expected remainder: 20 rings, 2 bars.
Rotate Ring 4 clockwise about 135°. Target opening direction: 354° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 19 rings, 2 bars.
Rotate Ring 5 counterclockwise about 42°. Target opening direction: 312° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 19 rings, 2 bars.
Rotate Ring 5 counterclockwise about 55°. Target opening direction: 7° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 18 rings, 2 bars.
Rotate Ring 11 clockwise about 23°. Target opening direction: 247° (right 0°, up 90°). Release and wait. Expected departure: Ring 11. Expected remainder: 17 rings, 2 bars.
Rotate Ring 21 clockwise about 69°. Target opening direction: 246° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 17 rings, 2 bars.
Rotate Ring 17 clockwise about 98°. Target opening direction: 172° (right 0°, up 90°). Release and wait. Expected departure: Ring 17. Expected remainder: 16 rings, 2 bars.
Rotate Ring 21 clockwise about 134°. Target opening direction: 112° (right 0°, up 90°). Release and wait. Expected departure: Ring 21. Expected remainder: 15 rings, 2 bars.
Rotate Ring 23 counterclockwise about 60°. Target opening direction: 60° (right 0°, up 90°). Release and wait. Expected departure: Ring 24, Ring 23. Expected remainder: 13 rings, 2 bars.
Rotate Ring 22 clockwise about 135°. Target opening direction: 174° (right 0°, up 90°). Release and wait. Expected departure: Ring 22. Expected remainder: 12 rings, 2 bars.
Rotate Ring 20 counterclockwise about 42°. Target opening direction: 132° (right 0°, up 90°). Release and wait. Expected departure: Ring 10. Expected remainder: 11 rings, 2 bars.
Rotate Ring 20 counterclockwise about 50°. Target opening direction: 182° (right 0°, up 90°). Release and wait. Expected departure: Ring 20. Expected remainder: 10 rings, 2 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Middle left | Open |
| 2 | Middle left | Open |
| 3 | Upper left | Open |
| 4 | Lower left | Open |
| 5 | Lower center | Open |
| 6 | Center | Open |
| 7 | Center | Open |
| 8 | Upper center | Open |
| 9 | Center | Open |
| 10 | Upper center | Open |
| 11 | Lower center | Open |
| 12 | Lower center | Open |
| 13 | Center | Open |
| 14 | Center | Open |
| 15 | Upper center | Open |
| 16 | Center | Open |
| 17 | Lower center | Open |
| 18 | Center | Open |
| 19 | Center | Open |
| 20 | Upper center | Open |
| 21 | Lower right | Open |
| 22 | Upper right | Open |
| 23 | Middle right | Open |
| 24 | Middle right | Open |
- Ring 13 is connected to a blocking relationship with ring 18. Check this pair on the diagram.
- Ring 13 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 14 is connected to a blocking relationship with ring 19. Check this pair on the diagram.
- Ring 14 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 16 is connected to a blocking relationship with ring 19. Check this pair on the diagram.
- Ring 16 is connected to a blocking relationship with ring 18. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 15 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 15 is connected to a blocking relationship with ring 19. Check this pair on the diagram.
- Ring 15 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 15 is connected to a blocking relationship with ring 20. Check this pair on the diagram.
- Ring 23 is connected to a blocking relationship with ring 21. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 18. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 17. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 20 is connected to a blocking relationship with ring 22. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 21. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 24 is connected to a blocking relationship with ring 22. Check this pair on the diagram.
- Ring 24 is connected to a blocking relationship with ring 23. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 20. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 17. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
Board · G
6 rings, 4 blocking pins, 14 slide bars, 14 clamps
Ring numbers
123456
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 6 · Blocking pins: 4 · Stop pins: 0 · Slide bars: 14 · Clamps: 14 · Bombs: 0
Step-by-step walkthrough
Candidate walkthrough; gameplay confirmation is pending. Release after each move and wait for the expected departures. Stop and report the first mismatch. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 6 clockwise about 150°. Target opening direction: 120° (right 0°, up 90°). Release and wait. Expected departure: Ring 6. Expected remainder: 5 rings, 14 bars.
Rotate Ring 2 counterclockwise about 15°. Target opening direction: 323° (right 0°, up 90°). Release and wait. Expected departure: Ring 1, Ring 2. Expected remainder: 3 rings, 14 bars.
Rotate Ring 3 clockwise about 150°. Target opening direction: 120° (right 0°, up 90°). Release and wait. Expected departure: Ring 3. Expected remainder: 2 rings, 14 bars.
Rotate Ring 4 clockwise about 40°. Target opening direction: 165° (right 0°, up 90°). Release and wait. Expected departure: Ring 5, Ring 4. Expected remainder: 0 rings, 14 bars.
Move S10 right along its track about 10.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S10. Expected remainder: 0 rings, 13 bars.
Move S11 right along its track about 9.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S11. Expected remainder: 0 rings, 12 bars.
Move S12 up along its track about 4.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S12. Expected remainder: 0 rings, 11 bars.
Move S14 right along its track about 2.86 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S14. Expected remainder: 0 rings, 10 bars.
Move S13 right along its track about 5.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S13. Expected remainder: 0 rings, 9 bars.
Move S2 left along its track about 3.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S2. Expected remainder: 0 rings, 8 bars.
Move S1 left along its track about 10.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S1. Expected remainder: 0 rings, 7 bars.
Move S3 right along its track about 4.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 0 rings, 6 bars.
Move S4 left along its track about 6.86 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S4. Expected remainder: 0 rings, 5 bars.
Move S5 left along its track about 11.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S5. Expected remainder: 0 rings, 4 bars.
Move S6 up along its track about 4.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S6. Expected remainder: 0 rings, 3 bars.
Move S7 left along its track about 12.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S7. Expected remainder: 0 rings, 2 bars.
Move S8 left along its track about 15.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S8. Expected remainder: 0 rings, 1 bars.
Move S9 right along its track about 11.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S9. Expected remainder: 0 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Center | Closed |
| 2 | Center | Open |
| 3 | Center | Open |
| 4 | Middle right | Open |
| 5 | Center | Closed |
| 6 | Center | Open |
- Ring 1 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
Board · H
6 rings, 4 blocking pins, 14 slide bars, 14 clamps
Ring numbers
123456
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 6 · Blocking pins: 4 · Stop pins: 0 · Slide bars: 14 · Clamps: 14 · Bombs: 0
Step-by-step walkthrough
Candidate walkthrough; gameplay confirmation is pending. Release after each move and wait for the expected departures. Stop and report the first mismatch. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 5 clockwise about 165°. Target opening direction: 105° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 5 rings, 14 bars.
Rotate Ring 2 counterclockwise about 15°. Target opening direction: 323° (right 0°, up 90°). Release and wait. Expected departure: Ring 1, Ring 2. Expected remainder: 3 rings, 14 bars.
Rotate Ring 6 clockwise about 165°. Target opening direction: 105° (right 0°, up 90°). Release and wait. Expected departure: Ring 6. Expected remainder: 2 rings, 14 bars.
Rotate Ring 4 clockwise about 40°. Target opening direction: 165° (right 0°, up 90°). Release and wait. Expected departure: Ring 3, Ring 4. Expected remainder: 0 rings, 14 bars.
Move S10 right along its track about 10.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S10. Expected remainder: 0 rings, 13 bars.
Move S11 right along its track about 9.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S11. Expected remainder: 0 rings, 12 bars.
Move S12 up along its track about 4.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S12. Expected remainder: 0 rings, 11 bars.
Move S14 right along its track about 2.86 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S14. Expected remainder: 0 rings, 10 bars.
Move S13 right along its track about 5.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S13. Expected remainder: 0 rings, 9 bars.
Move S2 left along its track about 3.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S2. Expected remainder: 0 rings, 8 bars.
Move S1 left along its track about 10.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S1. Expected remainder: 0 rings, 7 bars.
Move S3 right along its track about 4.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 0 rings, 6 bars.
Move S4 left along its track about 6.86 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S4. Expected remainder: 0 rings, 5 bars.
Move S5 left along its track about 11.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S5. Expected remainder: 0 rings, 4 bars.
Move S6 up along its track about 4.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S6. Expected remainder: 0 rings, 3 bars.
Move S7 left along its track about 12.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S7. Expected remainder: 0 rings, 2 bars.
Move S8 left along its track about 15.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S8. Expected remainder: 0 rings, 1 bars.
Move S9 right along its track about 11.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S9. Expected remainder: 0 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Center | Closed |
| 2 | Center | Open |
| 3 | Center | Closed |
| 4 | Middle right | Open |
| 5 | Center | Open |
| 6 | Center | Open |
- Ring 1 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
Board · I
10 rings, 11 blocking pins, 5 slide bars, 2 clamps
Ring numbers
12345678910
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 10 · Blocking pins: 11 · Stop pins: 0 · Slide bars: 5 · Clamps: 2 · Bombs: 0
Step-by-step walkthrough
Candidate walkthrough; gameplay confirmation is pending. Release after each move and wait for the expected departures. Stop and report the first mismatch. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 5 clockwise about 59°. Target opening direction: 166° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 9 rings, 5 bars.
Rotate Ring 1 counterclockwise about 105°. Target opening direction: 60° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 8 rings, 5 bars.
Move S3 right along its track about 1.71 ring radii. Release and wait. Expected departure: Ring 2. Expected remainder: 7 rings, 5 bars.
Move S3 left along its track about 5.00 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 7 rings, 4 bars.
Rotate Ring 9 clockwise about 45°. Target opening direction: 165° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 7 rings, 4 bars.
Rotate Ring 5 clockwise about 135°. Target opening direction: 31° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 7 rings, 4 bars.
Rotate Ring 5 clockwise about 57°. Target opening direction: 334° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 6 rings, 4 bars.
Move S1 up along its track about 2.29 ring radii. Release and wait. Expected departure: Ring 7. Expected remainder: 5 rings, 4 bars.
Move S1 down along its track about 8.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S1. Expected remainder: 5 rings, 3 bars.
Move S2 left along its track about 0.86 ring radii. Release and wait. No departure is expected yet. Expected remainder: 5 rings, 3 bars.
Move S2 left along its track about 2.57 ring radii. Release and wait. Expected departure: Ring 8. Expected remainder: 4 rings, 3 bars.
Move S2 left along its track about 5.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S2. Expected remainder: 4 rings, 2 bars.
Rotate Ring 6 clockwise about 44°. Target opening direction: 46° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 4 rings, 2 bars.
Rotate Ring 9 counterclockwise about 86°. Target opening direction: 251° (right 0°, up 90°). Release and wait. Expected departure: Ring 9, Ring 10. Expected remainder: 2 rings, 2 bars.
Rotate Ring 6 counterclockwise about 130°. Target opening direction: 176° (right 0°, up 90°). Release and wait. Expected departure: Ring 6, Ring 3. Expected remainder: 0 rings, 2 bars.
Move S4 left along its track about 6.86 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S4. Expected remainder: 0 rings, 1 bars.
Move S5 left along its track about 8.00 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S5. Expected remainder: 0 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Lower left | Open |
| 2 | Middle left | Open |
| 3 | Upper left | Open |
| 4 | Center | Open |
| 5 | Center | Open |
| 6 | Upper center | Open |
| 7 | Lower center | Open |
| 8 | Center | Closed |
| 9 | Upper center | Open |
| 10 | Center | Closed |
- Ring 2 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
Board · J
10 rings, 11 blocking pins, 5 slide bars, 2 clamps
Ring numbers
12345678910
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 10 · Blocking pins: 11 · Stop pins: 0 · Slide bars: 5 · Clamps: 2 · Bombs: 0
Step-by-step walkthrough
Candidate walkthrough; gameplay confirmation is pending. Release after each move and wait for the expected departures. Stop and report the first mismatch. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 5 clockwise about 74°. Target opening direction: 151° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 9 rings, 5 bars.
Rotate Ring 2 counterclockwise about 120°. Target opening direction: 75° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 8 rings, 5 bars.
Move S3 left along its track about 1.71 ring radii. Release and wait. Expected departure: Ring 3. Expected remainder: 7 rings, 5 bars.
Move S3 left along its track about 1.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 7 rings, 4 bars.
Rotate Ring 9 clockwise about 60°. Target opening direction: 150° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 7 rings, 4 bars.
Rotate Ring 5 clockwise about 135°. Target opening direction: 16° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 7 rings, 4 bars.
Move S2 left along its track about 0.86 ring radii. Release and wait. No departure is expected yet. Expected remainder: 7 rings, 4 bars.
Rotate Ring 6 clockwise about 44°. Target opening direction: 46° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 7 rings, 4 bars.
Rotate Ring 9 counterclockwise about 116°. Target opening direction: 266° (right 0°, up 90°). Release and wait. Expected departure: Ring 9, Ring 10. Expected remainder: 5 rings, 4 bars.
Rotate Ring 6 counterclockwise about 141°. Target opening direction: 187° (right 0°, up 90°). Release and wait. Expected departure: Ring 6, Ring 1. Expected remainder: 3 rings, 4 bars.
Rotate Ring 5 clockwise about 57°. Target opening direction: 319° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 2 rings, 4 bars.
Move S1 up along its track about 2.29 ring radii. Release and wait. Expected departure: Ring 7. Expected remainder: 1 rings, 4 bars.
Move S2 left along its track about 2.57 ring radii. Release and wait. Expected departure: Ring 8. Expected remainder: 0 rings, 4 bars.
Move S1 down along its track about 8.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S1. Expected remainder: 0 rings, 3 bars.
Move S2 left along its track about 5.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S2. Expected remainder: 0 rings, 2 bars.
Move S4 left along its track about 7.00 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S4. Expected remainder: 0 rings, 1 bars.
Move S5 left along its track about 8.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S5. Expected remainder: 0 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Upper left | Open |
| 2 | Lower left | Open |
| 3 | Middle left | Open |
| 4 | Center | Open |
| 5 | Center | Open |
| 6 | Upper center | Open |
| 7 | Lower center | Open |
| 8 | Center | Closed |
| 9 | Upper center | Open |
| 10 | Center | Closed |
- Ring 3 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
Frequently asked questions
Which board should I use for level 66?
This page has 10 distinct boards. The default A board has 7 rings and 6 blocking pins. Compare these features and the thumbnails before following its steps.
What do the numbers on the diagram mean?
They identify individual rings, not the operation order. A written step can also describe a bar or latch, so the step number is not always the ring number. Match the ring number named in the instruction with the diagram.
What should I check when I am stuck on level 66?
Check whether the ring is open or closed, whether a stop pin limits rotation and whether a latch is still locked by a bar. Repeated rotation does not remove a fixed obstruction. Compare the neighboring connections, then return to the step for the matching ring number.
