Level 58
19 Rings · 9 Board
Rotate Rings
Rotate Rings Level 60 walkthrough
The game has different level schedules, so the board for the same level number may differ. Choose the thumbnail that matches your game.
Ring numbers
3 rings, 2 blocking pins, 12 slide bars, 12 clamps, 2 timed bombs
123
Default A · Numbers identify the rings on the diagram; they do not specify an operation order.
Choose a matching board
Filters examine every variant; choose a thumbnail to compare a matching board.
Board · A
3 rings, 2 blocking pins, 12 slide bars, 12 clamps, 2 timed bombs
Ring numbers
123
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 3 · Blocking pins: 2 · Stop pins: 2 · Slide bars: 12 · Clamps: 12 · Bombs: 2
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. Bombs are shown at their saved positions; their effects and timers are not included in this candidate. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Move S10 right along its track about 2.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S10. Expected remainder: 3 rings, 11 bars.
Move S11 right along its track about 2.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S11. Expected remainder: 3 rings, 10 bars.
Move S12 right along its track about 3.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S12. Expected remainder: 3 rings, 9 bars.
Move S4 left along its track about 4.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S4. Expected remainder: 3 rings, 8 bars.
Move S3 left along its track about 4.00 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 3 rings, 7 bars.
Move S5 right along its track about 4.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S5. Expected remainder: 3 rings, 6 bars.
Move S6 right along its track about 4.00 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S6. Expected remainder: 3 rings, 5 bars.
Move S7 left along its track about 2.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S7. Expected remainder: 3 rings, 4 bars.
Move S8 left along its track about 2.57 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S8. Expected remainder: 3 rings, 3 bars.
Move S9 left along its track about 3.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S9. Expected remainder: 3 rings, 2 bars.
Read this board before making a move
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Stop pin
- Limits how far a ring can turn, so only part of the ring is reachable.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Bomb Ring
- Carries a timed bomb and can clear other rings. Deal with it before the countdown ends.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Center | Closed |
| 2 | Center | Closed |
| 3 | Center | Closed |
- Ring 2 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
Board · B / C / D / E
16 rings, 8 blocking pins, 17 slide bars, 17 clamps
Ring numbers
12345678910111213141516
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 16 · Blocking pins: 8 · Stop pins: 0 · Slide bars: 17 · Clamps: 17 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 16 clockwise about 150°. Target opening direction: 300° (right 0°, up 90°). Release and wait. Expected departure: Ring 16, Ring 3. Expected remainder: 14 rings, 17 bars.
Rotate Ring 14 clockwise about 34°. Target opening direction: 1° (right 0°, up 90°). Release and wait. Expected departure: Ring 14, Ring 12. Expected remainder: 12 rings, 17 bars.
Rotate Ring 6 counterclockwise about 35°. Target opening direction: 250° (right 0°, up 90°). Release and wait. Expected departure: Ring 8, Ring 6. Expected remainder: 10 rings, 17 bars.
Rotate Ring 13 clockwise about 35°. Target opening direction: 290° (right 0°, up 90°). Release and wait. Expected departure: Ring 13, Ring 11. Expected remainder: 8 rings, 17 bars.
Rotate Ring 10 clockwise about 150°. Target opening direction: 120° (right 0°, up 90°). Release and wait. Expected departure: Ring 10, Ring 15. Expected remainder: 6 rings, 17 bars.
Rotate Ring 7 clockwise about 35°. Target opening direction: 110° (right 0°, up 90°). Release and wait. Expected departure: Ring 9, Ring 7. Expected remainder: 4 rings, 17 bars.
Move S1 right along its track about 9.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S1. Expected remainder: 4 rings, 16 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Lower left | Open |
| 2 | Lower left | Open |
| 3 | Middle left | Closed |
| 4 | Lower left | Open |
| 5 | Lower left | Open |
| 6 | Center | Open |
| 7 | Upper center | Open |
| 8 | Center | Open |
| 9 | Upper center | Open |
| 10 | Lower center | Open |
| 11 | Middle right | Open |
| 12 | Upper right | Open |
| 13 | Middle right | Open |
| 14 | Upper right | Open |
| 15 | Lower center | Closed |
| 16 | Middle left | Open |
- Ring 3 is connected to a blocking relationship with ring 16. Check this pair on the diagram.
- Ring 15 is connected to a blocking relationship with ring 10. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
Board · F
12 rings, 12 blocking pins, 13 slide bars, 11 clamps
Ring numbers
123456789101112
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 12 · Blocking pins: 12 · Stop pins: 0 · Slide bars: 13 · Clamps: 11 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 1 counterclockwise about 17°. Target opening direction: 107° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 11 rings, 13 bars.
Rotate Ring 11 clockwise about 17°. Target opening direction: 73° (right 0°, up 90°). Release and wait. Expected departure: Ring 11. Expected remainder: 10 rings, 13 bars.
Rotate Ring 4 clockwise about 60°. Target opening direction: 345° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 9 rings, 13 bars.
Rotate Ring 9 counterclockwise about 60°. Target opening direction: 195° (right 0°, up 90°). Release and wait. Expected departure: Ring 9. Expected remainder: 8 rings, 13 bars.
Rotate Ring 8 counterclockwise about 60°. Target opening direction: 105° (right 0°, up 90°). Release and wait. Expected departure: Ring 8. Expected remainder: 7 rings, 13 bars.
Rotate Ring 3 clockwise about 60°. Target opening direction: 75° (right 0°, up 90°). Release and wait. Expected departure: Ring 3. Expected remainder: 6 rings, 13 bars.
Move S1 left along its track about 6.29 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S1. Expected remainder: 6 rings, 12 bars.
Move S10 right along its track about 3.86 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S10. Expected remainder: 6 rings, 11 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Upper left | Open |
| 2 | Center | Open |
| 3 | Lower center | Open |
| 4 | Center | Open |
| 5 | Upper center | Open |
| 6 | Center | Closed |
| 7 | Upper center | Open |
| 8 | Lower center | Open |
| 9 | Center | Open |
| 10 | Center | Open |
| 11 | Upper right | Open |
| 12 | Center | Open |
- Ring 6 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 10. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 12. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 12. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 12. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 12. Check this pair on the diagram.
Board · G / H
6 rings, 5 blocking pins, 8 slide bars, 8 clamps, 2 timed bombs
Ring numbers
123456
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 6 · Blocking pins: 5 · Stop pins: 2 · Slide bars: 8 · Clamps: 8 · Bombs: 2
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. Bombs are shown at their saved positions; their effects and timers are not included in this candidate. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 3 clockwise about 79°. Target opening direction: 11° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 5 rings, 8 bars.
Rotate Ring 3 counterclockwise about 158°. Target opening direction: 169° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 4 rings, 8 bars.
Rotate Ring 3 counterclockwise about 91°. Target opening direction: 260° (right 0°, up 90°). Release and wait. Expected departure: Ring 3. Expected remainder: 3 rings, 8 bars.
Move S2 right along its track about 4.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S2. Expected remainder: 3 rings, 7 bars.
Move S7 left along its track about 4.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S7. Expected remainder: 3 rings, 6 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Stop pin
- Limits how far a ring can turn, so only part of the ring is reachable.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Bomb Ring
- Carries a timed bomb and can clear other rings. Deal with it before the countdown ends.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Center | Closed |
| 2 | Lower center | Closed |
| 3 | Lower center | Open |
| 4 | Center | Closed |
| 5 | Lower center | Closed |
| 6 | Center | Closed |
- Ring 2 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
Board · I
17 rings, 22 blocking pins
Ring numbers
1234567891011121314151617
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 17 · Blocking pins: 22 · Stop pins: 0 · Slide bars: 0 · Clamps: 0 · Bombs: 0
Step-by-step walkthrough
Candidate walkthrough; gameplay confirmation is pending. Release after each move and wait for the expected departures. Stop and report the first mismatch.
Rotate Ring 16 clockwise about 52°. Target opening direction: 244° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 17 rings, 0 bars.
Rotate Ring 11 clockwise about 56°. Target opening direction: 211° (right 0°, up 90°). Release and wait. Expected departure: Ring 11. Expected remainder: 16 rings, 0 bars.
Rotate Ring 16 clockwise about 141°. Target opening direction: 103° (right 0°, up 90°). Release and wait. Expected departure: Ring 16. Expected remainder: 15 rings, 0 bars.
Rotate Ring 2 counterclockwise about 60°. Target opening direction: 295° (right 0°, up 90°). Release and wait. Expected departure: Ring 6. Expected remainder: 14 rings, 0 bars.
Rotate Ring 2 clockwise about 159°. Target opening direction: 136° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 13 rings, 0 bars.
Rotate Ring 5 clockwise about 63°. Target opening direction: 56° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 13 rings, 0 bars.
Rotate Ring 13 counterclockwise about 53°. Target opening direction: 126° (right 0°, up 90°). Release and wait. Expected departure: Ring 10. Expected remainder: 12 rings, 0 bars.
Rotate Ring 5 clockwise about 58°. Target opening direction: 358° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 13 counterclockwise about 56°. Target opening direction: 182° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 14 clockwise about 47°. Target opening direction: 239° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 4 counterclockwise about 54°. Target opening direction: 300° (right 0°, up 90°). Release and wait. Expected departure: Ring 8. Expected remainder: 11 rings, 0 bars.
Rotate Ring 14 clockwise about 48°. Target opening direction: 191° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 11 rings, 0 bars.
Rotate Ring 4 counterclockwise about 52°. Target opening direction: 352° (right 0°, up 90°). Release and wait. Expected departure: Ring 9. Expected remainder: 10 rings, 0 bars.
Rotate Ring 5 clockwise about 118°. Target opening direction: 240° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 9 rings, 0 bars.
Rotate Ring 4 clockwise about 171°. Target opening direction: 181° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 8 rings, 0 bars.
Rotate Ring 13 clockwise about 172°. Target opening direction: 10° (right 0°, up 90°). Release and wait. Expected departure: Ring 13. Expected remainder: 7 rings, 0 bars.
Rotate Ring 14 clockwise about 126°. Target opening direction: 65° (right 0°, up 90°). Release and wait. Expected departure: Ring 14. Expected remainder: 6 rings, 0 bars.
Rotate Ring 15 clockwise about 56°. Target opening direction: 323° (right 0°, up 90°). Release and wait. Expected departure: Ring 17. Expected remainder: 5 rings, 0 bars.
Rotate Ring 15 clockwise about 138°. Target opening direction: 185° (right 0°, up 90°). Release and wait. Expected departure: Ring 15. Expected remainder: 4 rings, 0 bars.
Rotate Ring 3 counterclockwise about 55°. Target opening direction: 223° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 3 rings, 0 bars.
Rotate Ring 3 clockwise about 168°. Target opening direction: 55° (right 0°, up 90°). Release and wait. Expected departure: Ring 3. Expected remainder: 2 rings, 0 bars.
Rotate Ring 7 clockwise about 61°. Target opening direction: 29° (right 0°, up 90°). Release and wait. Expected departure: Ring 7, Ring 12. Expected remainder: 0 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Middle left | Open |
| 2 | Lower left | Open |
| 3 | Upper left | Open |
| 4 | Middle left | Open |
| 5 | Middle left | Open |
| 6 | Lower center | Open |
| 7 | Upper center | Open |
| 8 | Lower center | Open |
| 9 | Center | Closed |
| 10 | Upper center | Open |
| 11 | Lower center | Open |
| 12 | Upper center | Open |
| 13 | Center | Open |
| 14 | Middle right | Open |
| 15 | Upper right | Open |
| 16 | Lower right | Open |
| 17 | Middle right | Open |
- Ring 9 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 16. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 16. Check this pair on the diagram.
Board · J
17 rings, 22 blocking pins
Ring numbers
1234567891011121314151617
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 17 · Blocking pins: 22 · Stop pins: 0 · Slide bars: 0 · Clamps: 0 · Bombs: 0
Step-by-step walkthrough
Candidate walkthrough; gameplay confirmation is pending. Release after each move and wait for the expected departures. Stop and report the first mismatch.
Rotate Ring 16 clockwise about 67°. Target opening direction: 229° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 17 rings, 0 bars.
Rotate Ring 11 clockwise about 71°. Target opening direction: 196° (right 0°, up 90°). Release and wait. Expected departure: Ring 11. Expected remainder: 16 rings, 0 bars.
Rotate Ring 16 clockwise about 141°. Target opening direction: 88° (right 0°, up 90°). Release and wait. Expected departure: Ring 16. Expected remainder: 15 rings, 0 bars.
Rotate Ring 2 counterclockwise about 75°. Target opening direction: 310° (right 0°, up 90°). Release and wait. Expected departure: Ring 6. Expected remainder: 14 rings, 0 bars.
Rotate Ring 2 counterclockwise about 141°. Target opening direction: 91° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 13 rings, 0 bars.
Rotate Ring 5 clockwise about 78°. Target opening direction: 41° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 13 rings, 0 bars.
Rotate Ring 13 counterclockwise about 68°. Target opening direction: 141° (right 0°, up 90°). Release and wait. Expected departure: Ring 10. Expected remainder: 12 rings, 0 bars.
Rotate Ring 5 clockwise about 58°. Target opening direction: 343° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 13 counterclockwise about 56°. Target opening direction: 197° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 14 clockwise about 62°. Target opening direction: 224° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 4 counterclockwise about 69°. Target opening direction: 315° (right 0°, up 90°). Release and wait. Expected departure: Ring 8. Expected remainder: 11 rings, 0 bars.
Rotate Ring 14 clockwise about 48°. Target opening direction: 176° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 11 rings, 0 bars.
Rotate Ring 4 counterclockwise about 52°. Target opening direction: 7° (right 0°, up 90°). Release and wait. Expected departure: Ring 9. Expected remainder: 10 rings, 0 bars.
Rotate Ring 5 clockwise about 118°. Target opening direction: 225° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 9 rings, 0 bars.
Rotate Ring 4 counterclockwise about 128°. Target opening direction: 135° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 8 rings, 0 bars.
Rotate Ring 13 counterclockwise about 127°. Target opening direction: 324° (right 0°, up 90°). Release and wait. Expected departure: Ring 13. Expected remainder: 7 rings, 0 bars.
Rotate Ring 14 clockwise about 126°. Target opening direction: 50° (right 0°, up 90°). Release and wait. Expected departure: Ring 14. Expected remainder: 6 rings, 0 bars.
Rotate Ring 15 clockwise about 71°. Target opening direction: 308° (right 0°, up 90°). Release and wait. Expected departure: Ring 17. Expected remainder: 5 rings, 0 bars.
Rotate Ring 15 clockwise about 138°. Target opening direction: 170° (right 0°, up 90°). Release and wait. Expected departure: Ring 15. Expected remainder: 4 rings, 0 bars.
Rotate Ring 3 counterclockwise about 70°. Target opening direction: 238° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 3 rings, 0 bars.
Rotate Ring 3 counterclockwise about 132°. Target opening direction: 10° (right 0°, up 90°). Release and wait. Expected departure: Ring 3. Expected remainder: 2 rings, 0 bars.
Rotate Ring 7 clockwise about 76°. Target opening direction: 14° (right 0°, up 90°). Release and wait. Expected departure: Ring 7, Ring 12. Expected remainder: 0 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Middle left | Open |
| 2 | Lower left | Open |
| 3 | Upper left | Open |
| 4 | Middle left | Open |
| 5 | Middle left | Open |
| 6 | Lower center | Open |
| 7 | Upper center | Open |
| 8 | Lower center | Open |
| 9 | Center | Closed |
| 10 | Upper center | Open |
| 11 | Lower center | Open |
| 12 | Upper center | Open |
| 13 | Center | Open |
| 14 | Middle right | Open |
| 15 | Upper right | Open |
| 16 | Lower right | Open |
| 17 | Middle right | Open |
- Ring 9 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 16. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 16. Check this pair on the diagram.
Frequently asked questions
Which board should I use for level 60?
This page has 6 distinct boards. The default A board has 3 rings and 2 blocking pins. Compare these features and the thumbnails before following its steps.
What do the numbers on the diagram mean?
They identify individual rings, not the operation order. A written step can also describe a bar or latch, so the step number is not always the ring number. Match the ring number named in the instruction with the diagram.
What should I check when I am stuck on level 60?
Check whether the ring is open or closed, whether a stop pin limits rotation and whether a latch is still locked by a bar. Repeated rotation does not remove a fixed obstruction. Compare the neighboring connections, then return to the step for the matching ring number.
