Level 24
15 Rings · 8 Board
Rotate Rings
Rotate Rings Level 26 walkthrough
The game has different level schedules, so the board for the same level number may differ. Choose the thumbnail that matches your game.
Ring numbers
22 rings, 20 blocking pins, 2 slide bars, 2 clamps
12345678910111213141516171819202122
Default A · Numbers identify the rings on the diagram; they do not specify an operation order.
Choose a matching board
Filters examine every variant; choose a thumbnail to compare a matching board.
Board · A / G
22 rings, 20 blocking pins, 2 slide bars, 2 clamps
Ring numbers
12345678910111213141516171819202122
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 22 · Blocking pins: 20 · Stop pins: 0 · Slide bars: 2 · Clamps: 2 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 2 clockwise about 110°. Target opening direction: 30° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 21 rings, 2 bars.
Rotate Ring 1 counterclockwise about 70°. Target opening direction: 243° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 20 rings, 2 bars.
Rotate Ring 1 clockwise about 127°. Target opening direction: 116° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 19 rings, 2 bars.
Rotate Ring 5 clockwise about 104°. Target opening direction: 76° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 18 rings, 2 bars.
Rotate Ring 20 counterclockwise about 62°. Target opening direction: 56° (right 0°, up 90°). Release and wait. Expected departure: Ring 20. Expected remainder: 17 rings, 2 bars.
Rotate Ring 14 counterclockwise about 113°. Target opening direction: 326° (right 0°, up 90°). Release and wait. Expected departure: Ring 19. Expected remainder: 16 rings, 2 bars.
Rotate Ring 14 counterclockwise about 52°. Target opening direction: 18° (right 0°, up 90°). Release and wait. Expected departure: Ring 18. Expected remainder: 15 rings, 2 bars.
Rotate Ring 14 counterclockwise about 43°. Target opening direction: 61° (right 0°, up 90°). Release and wait. Expected departure: Ring 14. Expected remainder: 14 rings, 2 bars.
Rotate Ring 15 counterclockwise about 137°. Target opening direction: 353° (right 0°, up 90°). Release and wait. Expected departure: Ring 22. Expected remainder: 13 rings, 2 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Middle left | Open |
| 2 | Upper left | Open |
| 3 | Lower left | Open |
| 4 | Lower left | Open |
| 5 | Upper left | Open |
| 6 | Center | Open |
| 7 | Center | Open |
| 8 | Upper center | Open |
| 9 | Lower center | Open |
| 10 | Lower center | Open |
| 11 | Upper center | Open |
| 12 | Center | Open |
| 13 | Upper center | Open |
| 14 | Lower center | Open |
| 15 | Center | Open |
| 16 | Center | Open |
| 17 | Upper center | Open |
| 18 | Lower right | Open |
| 19 | Lower right | Open |
| 20 | Middle right | Open |
| 21 | Upper right | Open |
| 22 | Middle right | Open |
- Ring 12 is connected to a blocking relationship with ring 16. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 10. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 16 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 19 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 21. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 22 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 22 is connected to a blocking relationship with ring 20. Check this pair on the diagram.
- Ring 18 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 13 is connected to a blocking relationship with ring 21. Check this pair on the diagram.
Board · B
9 rings, 11 blocking pins, 6 slide bars, 4 clamps
Ring numbers
123456789
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 9 · Blocking pins: 11 · Stop pins: 0 · Slide bars: 6 · Clamps: 4 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 6 clockwise about 180°. Target opening direction: 270° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 9 rings, 6 bars.
Rotate Ring 6 clockwise about 60°. Target opening direction: 210° (right 0°, up 90°). Release and wait. Expected departure: Ring 6. Expected remainder: 8 rings, 6 bars.
Move S5 left along its track about 1.43 ring radii. Release and wait. No departure is expected yet. Expected remainder: 8 rings, 6 bars.
Move S5 left along its track about 2.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S5. Expected remainder: 8 rings, 5 bars.
Rotate Ring 4 counterclockwise about 41°. Target opening direction: 131° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 8 rings, 5 bars.
Move S1 left along its track about 6.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S1. Expected remainder: 8 rings, 4 bars.
Rotate Ring 4 counterclockwise about 79°. Target opening direction: 210° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 7 rings, 4 bars.
Rotate Ring 2 counterclockwise about 120°. Target opening direction: 270° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 6 rings, 4 bars.
Move S3 up along its track about 2.29 ring radii. Release and wait. No departure is expected yet. Expected remainder: 6 rings, 4 bars.
Move S3 up along its track about 4.86 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 6 rings, 3 bars.
Rotate Ring 7 clockwise about 60°. Target opening direction: 30° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 6 rings, 3 bars.
Move S2 up along its track about 1.43 ring radii. Release and wait. No departure is expected yet. Expected remainder: 6 rings, 3 bars.
Rotate Ring 8 clockwise about 120°. Target opening direction: 330° (right 0°, up 90°). Release and wait. Expected departure: Ring 8, Ring 9. Expected remainder: 4 rings, 3 bars.
Rotate Ring 7 clockwise about 180°. Target opening direction: 210° (right 0°, up 90°). Release and wait. Expected departure: Ring 7. Expected remainder: 3 rings, 3 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Lower left | Open |
| 2 | Middle left | Open |
| 3 | Center | Closed |
| 4 | Upper center | Open |
| 5 | Lower center | Open |
| 6 | Center | Open |
| 7 | Center | Open |
| 8 | Middle right | Open |
| 9 | Middle right | Open |
- Ring 1 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
Board · C
7 rings, 6 blocking pins, 8 slide bars, 8 clamps, 2 timed bombs
Ring numbers
1234567
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 7 · Blocking pins: 6 · Stop pins: 0 · Slide bars: 8 · Clamps: 8 · Bombs: 2
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. Bombs are shown at their saved positions; their effects and timers are not included in this candidate. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 4 clockwise about 115°. Target opening direction: 150° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 6 rings, 8 bars.
Rotate Ring 1 clockwise about 125°. Target opening direction: 55° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 5 rings, 8 bars.
Move S8 right along its track about 3.00 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S8. Expected remainder: 5 rings, 7 bars.
Move S3 down along its track about 6.86 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 5 rings, 6 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Bomb Ring
- Carries a timed bomb and can clear other rings. Deal with it before the countdown ends.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Lower center | Open |
| 2 | Lower center | Closed |
| 3 | Upper center | Closed |
| 4 | Lower center | Open |
| 5 | Upper center | Closed |
| 6 | Upper center | Closed |
| 7 | Upper center | Closed |
- Ring 7 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
Board · D
13 rings, 16 blocking pins
Ring numbers
12345678910111213
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 13 · Blocking pins: 16 · Stop pins: 0 · Slide bars: 0 · Clamps: 0 · Bombs: 0
Step-by-step walkthrough
Candidate walkthrough; gameplay confirmation is pending. Release after each move and wait for the expected departures. Stop and report the first mismatch.
Rotate Ring 5 clockwise about 65°. Target opening direction: 325° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 13 rings, 0 bars.
Rotate Ring 2 clockwise about 166°. Target opening direction: 14° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 13 rings, 0 bars.
Rotate Ring 2 clockwise about 57°. Target opening direction: 317° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 12 rings, 0 bars.
Rotate Ring 10 clockwise about 31°. Target opening direction: 104° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 11 clockwise about 138°. Target opening direction: 282° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 1 clockwise about 166°. Target opening direction: 104° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 1 clockwise about 48°. Target opening direction: 56° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 11 rings, 0 bars.
Rotate Ring 8 counterclockwise about 34°. Target opening direction: 304° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 11 rings, 0 bars.
Rotate Ring 13 clockwise about 30°. Target opening direction: 60° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 11 rings, 0 bars.
Rotate Ring 10 clockwise about 147°. Target opening direction: 317° (right 0°, up 90°). Release and wait. Expected departure: Ring 10, Ring 12. Expected remainder: 9 rings, 0 bars.
Rotate Ring 8 counterclockwise about 116°. Target opening direction: 60° (right 0°, up 90°). Release and wait. Expected departure: Ring 8. Expected remainder: 8 rings, 0 bars.
Rotate Ring 4 counterclockwise about 60°. Target opening direction: 15° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 7 rings, 0 bars.
Rotate Ring 13 counterclockwise about 106°. Target opening direction: 166° (right 0°, up 90°). Release and wait. Expected departure: Ring 13. Expected remainder: 6 rings, 0 bars.
Rotate Ring 9 clockwise about 171°. Target opening direction: 339° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 6 rings, 0 bars.
Rotate Ring 11 clockwise about 108°. Target opening direction: 174° (right 0°, up 90°). Release and wait. Expected departure: Ring 11. Expected remainder: 5 rings, 0 bars.
Rotate Ring 7 counterclockwise about 96°. Target opening direction: 186° (right 0°, up 90°). Release and wait. Expected departure: Ring 7. Expected remainder: 4 rings, 0 bars.
Rotate Ring 9 counterclockwise about 180°. Target opening direction: 159° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 4 rings, 0 bars.
Rotate Ring 9 counterclockwise about 56°. Target opening direction: 215° (right 0°, up 90°). Release and wait. Expected departure: Ring 9, Ring 6. Expected remainder: 2 rings, 0 bars.
Rotate Ring 5 counterclockwise about 113°. Target opening direction: 78° (right 0°, up 90°). Release and wait. Expected departure: Ring 5, Ring 3. Expected remainder: 0 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Lower left | Open |
| 2 | Middle left | Open |
| 3 | Upper center | Open |
| 4 | Lower center | Open |
| 5 | Center | Open |
| 6 | Center | Closed |
| 7 | Upper center | Open |
| 8 | Lower center | Open |
| 9 | Center | Open |
| 10 | Lower center | Open |
| 11 | Upper center | Open |
| 12 | Lower right | Open |
| 13 | Middle right | Open |
- Ring 8 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 10. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 13 is connected to a blocking relationship with ring 10. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
Board · E
17 rings, 22 blocking pins
Ring numbers
1234567891011121314151617
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 17 · Blocking pins: 22 · Stop pins: 0 · Slide bars: 0 · Clamps: 0 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution.
Rotate Ring 1 clockwise about 20°. Target opening direction: 144° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 17 rings, 0 bars.
Rotate Ring 1 clockwise about 65°. Target opening direction: 79° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 16 rings, 0 bars.
Rotate Ring 8 counterclockwise about 50°. Target opening direction: 140° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 15 rings, 0 bars.
Rotate Ring 8 counterclockwise about 101°. Target opening direction: 241° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 15 rings, 0 bars.
Rotate Ring 2 counterclockwise about 28°. Target opening direction: 203° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 15 rings, 0 bars.
Rotate Ring 2 counterclockwise about 71°. Target opening direction: 274° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 14 rings, 0 bars.
Rotate Ring 9 clockwise about 54°. Target opening direction: 217° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 13 rings, 0 bars.
Rotate Ring 9 clockwise about 97°. Target opening direction: 120° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 13 rings, 0 bars.
Rotate Ring 17 clockwise about 23°. Target opening direction: 337° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 13 rings, 0 bars.
Rotate Ring 17 clockwise about 71°. Target opening direction: 266° (right 0°, up 90°). Release and wait. Expected departure: Ring 17. Expected remainder: 12 rings, 0 bars.
Rotate Ring 3 clockwise about 98°. Target opening direction: 77° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 12 rings, 0 bars.
Rotate Ring 7 clockwise about 149°. Target opening direction: 342° (right 0°, up 90°). Release and wait. Expected departure: Ring 7. Expected remainder: 11 rings, 0 bars.
Rotate Ring 3 clockwise about 96°. Target opening direction: 341° (right 0°, up 90°). Release and wait. Expected departure: Ring 3. Expected remainder: 10 rings, 0 bars.
Rotate Ring 15 counterclockwise about 47°. Target opening direction: 42° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 10 rings, 0 bars.
Rotate Ring 16 counterclockwise about 105°. Target opening direction: 101° (right 0°, up 90°). Release and wait. Expected departure: Ring 16. Expected remainder: 9 rings, 0 bars.
Rotate Ring 15 clockwise about 142°. Target opening direction: 260° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 9 rings, 0 bars.
Rotate Ring 11 clockwise about 84°. Target opening direction: 235° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 9 rings, 0 bars.
Rotate Ring 15 clockwise about 97°. Target opening direction: 163° (right 0°, up 90°). Release and wait. Expected departure: Ring 15. Expected remainder: 8 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Upper left | Open |
| 2 | Middle left | Open |
| 3 | Middle left | Open |
| 4 | Lower left | Open |
| 5 | Upper left | Open |
| 6 | Center | Open |
| 7 | Center | Open |
| 8 | Upper center | Open |
| 9 | Lower center | Open |
| 10 | Center | Closed |
| 11 | Center | Open |
| 12 | Center | Open |
| 13 | Upper right | Open |
| 14 | Lower right | Open |
| 15 | Middle right | Open |
| 16 | Upper right | Open |
| 17 | Lower right | Open |
- Ring 10 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 12. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 13 is connected to a blocking relationship with ring 16. Check this pair on the diagram.
- Ring 13 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 16 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 14 is connected to a blocking relationship with ring 17. Check this pair on the diagram.
- Ring 14 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
Board · F
12 rings, 16 blocking pins
Ring numbers
123456789101112
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 12 · Blocking pins: 16 · Stop pins: 0 · Slide bars: 0 · Clamps: 0 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution.
Rotate Ring 11 counterclockwise about 45°. Target opening direction: 60° (right 0°, up 90°). Release and wait. Expected departure: Ring 12. Expected remainder: 11 rings, 0 bars.
Rotate Ring 6 clockwise about 30°. Target opening direction: 240° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 11 rings, 0 bars.
Rotate Ring 3 clockwise about 45°. Target opening direction: 120° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 11 rings, 0 bars.
Rotate Ring 3 clockwise about 45°. Target opening direction: 75° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 11 rings, 0 bars.
Rotate Ring 11 clockwise about 120°. Target opening direction: 300° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 11 rings, 0 bars.
Rotate Ring 10 clockwise about 36°. Target opening direction: 300° (right 0°, up 90°). Release and wait. Expected departure: Ring 10. Expected remainder: 10 rings, 0 bars.
Rotate Ring 11 clockwise about 90°. Target opening direction: 210° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 10 rings, 0 bars.
Rotate Ring 11 clockwise about 45°. Target opening direction: 165° (right 0°, up 90°). Release and wait. Expected departure: Ring 11. Expected remainder: 9 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Lower left | Open |
| 2 | Middle left | Open |
| 3 | Middle left | Open |
| 4 | Upper left | Open |
| 5 | Lower center | Open |
| 6 | Center | Open |
| 7 | Center | Open |
| 8 | Upper center | Open |
| 9 | Lower right | Open |
| 10 | Middle right | Open |
| 11 | Middle right | Open |
| 12 | Upper right | Open |
- Ring 7 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 10. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 1 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
Board · H
22 rings, 20 blocking pins, 2 slide bars, 2 clamps
Ring numbers
12345678910111213141516171819202122
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 22 · Blocking pins: 20 · Stop pins: 0 · Slide bars: 2 · Clamps: 2 · Bombs: 0
Step-by-step walkthrough
The complete route is still being worked out. Only the opening moves below passed the current checks; they do not establish a full solution. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 2 clockwise about 125°. Target opening direction: 15° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 21 rings, 2 bars.
Rotate Ring 1 counterclockwise about 85°. Target opening direction: 258° (right 0°, up 90°). Release and wait. Expected departure: Ring 4. Expected remainder: 20 rings, 2 bars.
Rotate Ring 1 clockwise about 157°. Target opening direction: 101° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 19 rings, 2 bars.
Rotate Ring 5 clockwise about 119°. Target opening direction: 61° (right 0°, up 90°). Release and wait. Expected departure: Ring 5. Expected remainder: 18 rings, 2 bars.
Rotate Ring 20 counterclockwise about 77°. Target opening direction: 71° (right 0°, up 90°). Release and wait. Expected departure: Ring 20. Expected remainder: 17 rings, 2 bars.
Rotate Ring 14 counterclockwise about 113°. Target opening direction: 326° (right 0°, up 90°). Release and wait. Expected departure: Ring 19. Expected remainder: 16 rings, 2 bars.
Rotate Ring 14 counterclockwise about 52°. Target opening direction: 18° (right 0°, up 90°). Release and wait. Expected departure: Ring 18. Expected remainder: 15 rings, 2 bars.
Rotate Ring 14 counterclockwise about 43°. Target opening direction: 61° (right 0°, up 90°). Release and wait. Expected departure: Ring 14. Expected remainder: 14 rings, 2 bars.
Rotate Ring 15 counterclockwise about 137°. Target opening direction: 353° (right 0°, up 90°). Release and wait. Expected departure: Ring 22. Expected remainder: 13 rings, 2 bars.
Rotate Ring 6 clockwise about 133°. Target opening direction: 102° (right 0°, up 90°). Release and wait. Expected departure: Ring 6. Expected remainder: 12 rings, 2 bars.
Rotate Ring 16 counterclockwise about 125°. Target opening direction: 124° (right 0°, up 90°). Release and wait. Expected departure: Ring 16. Expected remainder: 11 rings, 2 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Middle left | Open |
| 2 | Upper left | Open |
| 3 | Lower left | Open |
| 4 | Lower left | Open |
| 5 | Upper left | Open |
| 6 | Center | Open |
| 7 | Center | Open |
| 8 | Upper center | Open |
| 9 | Lower center | Open |
| 10 | Lower center | Open |
| 11 | Upper center | Open |
| 12 | Center | Open |
| 13 | Upper center | Open |
| 14 | Lower center | Open |
| 15 | Center | Open |
| 16 | Center | Open |
| 17 | Upper center | Open |
| 18 | Lower right | Open |
| 19 | Lower right | Open |
| 20 | Middle right | Open |
| 21 | Upper right | Open |
| 22 | Middle right | Open |
- Ring 12 is connected to a blocking relationship with ring 16. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 10. Check this pair on the diagram.
- Ring 7 is connected to a blocking relationship with ring 6. Check this pair on the diagram.
- Ring 16 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 11 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 19 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 3 is connected to a blocking relationship with ring 9. Check this pair on the diagram.
- Ring 4 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 17 is connected to a blocking relationship with ring 21. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 5. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 8 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 22 is connected to a blocking relationship with ring 15. Check this pair on the diagram.
- Ring 22 is connected to a blocking relationship with ring 20. Check this pair on the diagram.
- Ring 18 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 13 is connected to a blocking relationship with ring 21. Check this pair on the diagram.
Board · I
14 rings, 11 blocking pins, 5 slide bars, 4 clamps
Ring numbers
1234567891011121314
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 14 · Blocking pins: 11 · Stop pins: 3 · Slide bars: 5 · Clamps: 4 · Bombs: 0
Step-by-step walkthrough
Candidate walkthrough; gameplay confirmation is pending. Release after each move and wait for the expected departures. Stop and report the first mismatch. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 1 counterclockwise about 60°. Target opening direction: 60° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 13 rings, 5 bars.
Rotate Ring 2 clockwise about 150°. Target opening direction: 30° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 12 rings, 5 bars.
Rotate Ring 3 clockwise about 150°. Target opening direction: 120° (right 0°, up 90°). Release and wait. Expected departure: Ring 3. Expected remainder: 11 rings, 5 bars.
Move S3 left along its track about 5.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 11 rings, 4 bars.
Rotate Ring 8 clockwise about 60°. Target opening direction: 120° (right 0°, up 90°). Release and wait. Expected departure: Ring 8. Expected remainder: 10 rings, 4 bars.
Rotate Ring 13 clockwise about 150°. Target opening direction: 300° (right 0°, up 90°). Release and wait. Expected departure: Ring 13. Expected remainder: 9 rings, 4 bars.
Move S5 down along its track about 3.29 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S5. Expected remainder: 9 rings, 3 bars.
Move S4 right along its track about 1.71 ring radii. Release and wait. No departure is expected yet. Expected remainder: 9 rings, 3 bars.
Move S4 right along its track about 1.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S4. Expected remainder: 9 rings, 2 bars.
Rotate Ring 14 counterclockwise about 150°. Target opening direction: 150° (right 0°, up 90°). Release and wait. Expected departure: Ring 14, Ring 9. Expected remainder: 7 rings, 2 bars.
Rotate Ring 11 clockwise about 53°. Target opening direction: 127° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 7 rings, 2 bars.
Rotate Ring 12 clockwise about 4°. This closed ring turns together with its pins. Release and wait. Expected departure: Ring 12. Expected remainder: 6 rings, 2 bars.
Rotate Ring 7 counterclockwise about 102°. Target opening direction: 117° (right 0°, up 90°). Release and wait. Expected departure: Ring 5, Ring 7. Expected remainder: 4 rings, 2 bars.
Move S1 up along its track about 11.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S1. Expected remainder: 4 rings, 1 bars.
Rotate Ring 4 clockwise about 95°. Target opening direction: 355° (right 0°, up 90°). Release and wait. Expected departure: Ring 4, Ring 6. Expected remainder: 2 rings, 1 bars.
Move S2 left along its track about 6.00 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S2. Expected remainder: 2 rings, 0 bars.
Rotate Ring 11 counterclockwise about 113°. Target opening direction: 240° (right 0°, up 90°). Release and wait. Expected departure: Ring 10, Ring 11. Expected remainder: 0 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Stop pin
- Limits how far a ring can turn, so only part of the ring is reachable.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Upper center | Open |
| 2 | Upper center | Open |
| 3 | Lower center | Open |
| 4 | Lower center | Open |
| 5 | Center | Open |
| 6 | Lower center | Open |
| 7 | Center | Open |
| 8 | Upper center | Open |
| 9 | Upper center | Open |
| 10 | Lower center | Open |
| 11 | Lower center | Open |
| 12 | Center | Closed |
| 13 | Center | Open |
| 14 | Upper center | Open |
- Ring 4 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
Board · J
14 rings, 11 blocking pins, 5 slide bars, 4 clamps
Ring numbers
1234567891011121314
Numbers identify the rings on the diagram; they do not specify an operation order.
Diagram legend
Numbers identify individual rings; S labels bars, C labels clamps, and B marks a bomb. Match the colored rings, pins, slide bars and clamps to your board.
Rings: 14 · Blocking pins: 11 · Stop pins: 3 · Slide bars: 5 · Clamps: 4 · Bombs: 0
Step-by-step walkthrough
Candidate walkthrough; gameplay confirmation is pending. Release after each move and wait for the expected departures. Stop and report the first mismatch. This candidate assumes a clamp opens when its paired bar leaves; confirm this behavior in the game.
Rotate Ring 1 counterclockwise about 75°. Target opening direction: 75° (right 0°, up 90°). Release and wait. Expected departure: Ring 1. Expected remainder: 13 rings, 5 bars.
Rotate Ring 2 clockwise about 165°. Target opening direction: 15° (right 0°, up 90°). Release and wait. Expected departure: Ring 2. Expected remainder: 12 rings, 5 bars.
Rotate Ring 3 clockwise about 165°. Target opening direction: 105° (right 0°, up 90°). Release and wait. Expected departure: Ring 3. Expected remainder: 11 rings, 5 bars.
Move S3 left along its track about 5.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S3. Expected remainder: 11 rings, 4 bars.
Rotate Ring 8 clockwise about 75°. Target opening direction: 105° (right 0°, up 90°). Release and wait. Expected departure: Ring 8. Expected remainder: 10 rings, 4 bars.
Rotate Ring 13 clockwise about 165°. Target opening direction: 285° (right 0°, up 90°). Release and wait. Expected departure: Ring 13. Expected remainder: 9 rings, 4 bars.
Move S5 down along its track about 3.43 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S5. Expected remainder: 9 rings, 3 bars.
Move S4 right along its track about 1.71 ring radii. Release and wait. No departure is expected yet. Expected remainder: 9 rings, 3 bars.
Move S4 right along its track about 1.71 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S4. Expected remainder: 9 rings, 2 bars.
Rotate Ring 14 counterclockwise about 165°. Target opening direction: 165° (right 0°, up 90°). Release and wait. Expected departure: Ring 14, Ring 9. Expected remainder: 7 rings, 2 bars.
Rotate Ring 11 clockwise about 38°. Target opening direction: 142° (right 0°, up 90°). Release and wait. No departure is expected yet. Expected remainder: 7 rings, 2 bars.
Rotate Ring 12 clockwise about 22°. This closed ring turns together with its pins. Release and wait. Expected departure: Ring 12. Expected remainder: 6 rings, 2 bars.
Rotate Ring 7 counterclockwise about 117°. Target opening direction: 132° (right 0°, up 90°). Release and wait. Expected departure: Ring 5, Ring 7. Expected remainder: 4 rings, 2 bars.
Move S1 up along its track about 11.14 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S1. Expected remainder: 4 rings, 1 bars.
Rotate Ring 4 clockwise about 110°. Target opening direction: 340° (right 0°, up 90°). Release and wait. Expected departure: Ring 4, Ring 6. Expected remainder: 2 rings, 1 bars.
Move S2 left along its track about 6.00 ring radii. Continue until the bar leaves the board. Release and wait. Expected departure: S2. Expected remainder: 2 rings, 0 bars.
Rotate Ring 11 counterclockwise about 113°. Target opening direction: 255° (right 0°, up 90°). Release and wait. Expected departure: Ring 10, Ring 11. Expected remainder: 0 rings, 0 bars.
Read this board before making a move
- Ring
- An open ring can rotate. Align its opening with the connecting pin to release that connection. Rings fly away automatically once their connections and constraints are released.
- Blocking pin
- A fixed pin sitting on a ring's edge. It holds another ring in place, so its gap has to face this pin.Read the mechanism guide →
- Stop pin
- Limits how far a ring can turn, so only part of the ring is reachable.Read the mechanism guide →
- Latch
- Holds a ring in place. A stick locks it, so release the stick first and then turn the matching ring.Read the mechanism guide →
- Stick
- Slide bar. Move it sideways to release the latch it is tied to.Read the mechanism guide →
- Closed ring
- A closed ring has no opening. Release its blocking connections using the surrounding objects; the ring flies away automatically when it is free.Read the mechanism guide →
Ring positions and connections
Positions refer to the diagram. Connections describe what to inspect, not an additional removal order.
| Ring | Position | Type |
|---|---|---|
| 1 | Upper center | Open |
| 2 | Upper center | Open |
| 3 | Lower center | Open |
| 4 | Lower center | Open |
| 5 | Center | Open |
| 6 | Lower center | Open |
| 7 | Center | Open |
| 8 | Upper center | Open |
| 9 | Upper center | Open |
| 10 | Lower center | Open |
| 11 | Lower center | Open |
| 12 | Center | Closed |
| 13 | Center | Open |
| 14 | Upper center | Open |
- Ring 4 is connected to a blocking relationship with ring 3. Check this pair on the diagram.
- Ring 6 is connected to a blocking relationship with ring 4. Check this pair on the diagram.
- Ring 5 is connected to a blocking relationship with ring 7. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 13. Check this pair on the diagram.
- Ring 12 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 8. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 14. Check this pair on the diagram.
- Ring 9 is connected to a blocking relationship with ring 2. Check this pair on the diagram.
- Ring 2 is connected to a blocking relationship with ring 1. Check this pair on the diagram.
- Ring 10 is connected to a blocking relationship with ring 11. Check this pair on the diagram.
Frequently asked questions
Which board should I use for level 26?
This page has 9 distinct boards. The default A board has 22 rings and 20 blocking pins. Compare these features and the thumbnails before following its steps.
What do the numbers on the diagram mean?
They identify individual rings, not the operation order. A written step can also describe a bar or latch, so the step number is not always the ring number. Match the ring number named in the instruction with the diagram.
What should I check when I am stuck on level 26?
Check whether the ring is open or closed, whether a stop pin limits rotation and whether a latch is still locked by a bar. Repeated rotation does not remove a fixed obstruction. Compare the neighboring connections, then return to the step for the matching ring number.
